Are the files on the Github repository the latest and current ones?
I believe they are, but wanted to confirm.
If I not mistaken, the Lisa original print dimensions are 235mm tall, with a MAX circle print area of about 200mm or a square with 156mm sides.
Is this correct?
I am ready to build this printer, and I am still debating whether I would be happy with the original size, or make it at least a 2X.
I will probably not need to go any bigger than that for now, after all this is my first printer build.
I must say I can probably build the printer mechanically without too many snags, but I am a bit concerned over the electronics/software side of things...
The software leveller requirements scares me the most. I would be completey unable to program this myself.
If the 2X machine is "useless" without it, then it is a show stopper for me for the 2X.
I may want to upgrade the stepper motors, so that the machine can be more versatile if I need to.
The ebay models listed in this thread seem a good option.
Last but not least, the Rockstock Max is on sale right now, at under $900.
Other than the obvious print size differences, which other factors make the Lisa or Lisa 2X a much better investment?
I want to make sure that I make the most of my budget. I know that if I build the RockStock Max for example, and realize that the Lisa is a much better printer overall, I will not have the budget to build another 3D printer for a while...
I am more concerned with print resolution/quality in PLA and ABS than print size.
Thank you for helping me make the right choices. :)
I believe they are, but wanted to confirm.
If I not mistaken, the Lisa original print dimensions are 235mm tall, with a MAX circle print area of about 200mm or a square with 156mm sides.
Is this correct?
I am ready to build this printer, and I am still debating whether I would be happy with the original size, or make it at least a 2X.
I will probably not need to go any bigger than that for now, after all this is my first printer build.
I must say I can probably build the printer mechanically without too many snags, but I am a bit concerned over the electronics/software side of things...
The software leveller requirements scares me the most. I would be completey unable to program this myself.
If the 2X machine is "useless" without it, then it is a show stopper for me for the 2X.
I may want to upgrade the stepper motors, so that the machine can be more versatile if I need to.
The ebay models listed in this thread seem a good option.
Last but not least, the Rockstock Max is on sale right now, at under $900.
Other than the obvious print size differences, which other factors make the Lisa or Lisa 2X a much better investment?
I want to make sure that I make the most of my budget. I know that if I build the RockStock Max for example, and realize that the Lisa is a much better printer overall, I will not have the budget to build another 3D printer for a while...
I am more concerned with print resolution/quality in PLA and ABS than print size.
Thank you for helping me make the right choices. :)