I have a Rostock that im trying to make print since january...I have the same problem than proton. Sometimes I released any complete print but not more than five. It always stops extrude plastic in the middle of the print work.
Im using the airtripper extruder v2 and MK8. I tried it with MK7 too and without the optional MR105ZZ bearing. I begin with ABS from reprapworld. Without any good result somebody gives me a little of another ABS because of the bubbles of mine. Now im trying also with PLA from bq company.
I tried all temperatures and of course i dont trust completely in my thermistors from ebay and without datasheet...but they really seems to give the correct temperature.
The Hot End is the J-Head V with 0.5mm nozzle.
I wanted to know if Proton resolved this issue and if he can give me some advice for this eternal problem that will make me to kill my printer!!
I dont know if change the extruder to a wade's or change the hot end...I really tried everything I could see or thought could be giving the problem.
Thanks!
Im using the airtripper extruder v2 and MK8. I tried it with MK7 too and without the optional MR105ZZ bearing. I begin with ABS from reprapworld. Without any good result somebody gives me a little of another ABS because of the bubbles of mine. Now im trying also with PLA from bq company.
I tried all temperatures and of course i dont trust completely in my thermistors from ebay and without datasheet...but they really seems to give the correct temperature.
The Hot End is the J-Head V with 0.5mm nozzle.
I wanted to know if Proton resolved this issue and if he can give me some advice for this eternal problem that will make me to kill my printer!!
I dont know if change the extruder to a wade's or change the hot end...I really tried everything I could see or thought could be giving the problem.
Thanks!