Quote
pugzor
Out of interest, is there anything really stopping us adding extra height to the build volume? I'm guessing the main limitations would be the amount of v slot and -gt2 belt you've got to play with, along with wiring length, but is there anything else? Was just playing with the idea of trying to make the print envelope 300mm high instead of 250mm.... Is that achievable?
Hi Andrew
The main limitation, with 2020 extrusion, is the amount of twist in the towers. Going from 600mm to 650mm to get that extra 50mm of build height will be fine but much more and you would really need more substantial extrusion.
Andy