>> Did you need a tap for the push-fit Bowden connectors, or did you self-thread it somehow? <<
Cold End: selfthreading
Hot End: I currently use one of those chinese J-Heads which already has a 1/8 thread at the top of the PEEK nozzle holder, so I could drill the J-Head mount to a constant 16mm (the OD of the nozzle holder) from top to bottom and the Pushfit went right into the nozzle holder.
Tonight I'll complete a new mount for my newly arrived hotends.com "original" J-Head, this time the Pushfit will selfthread into the mount as originally intended by Richard's design.
Cold End: selfthreading
Hot End: I currently use one of those chinese J-Heads which already has a 1/8 thread at the top of the PEEK nozzle holder, so I could drill the J-Head mount to a constant 16mm (the OD of the nozzle holder) from top to bottom and the Pushfit went right into the nozzle holder.
Tonight I'll complete a new mount for my newly arrived hotends.com "original" J-Head, this time the Pushfit will selfthread into the mount as originally intended by Richard's design.