Re: Cherry Pi III Is Available
Thanks a lot Andy! Compared your setting with mine gave me some information on what to ajust. I changed some and added note to others, so I'll know what to change if it dosent go right. Does your...
View Articleis their a 3d printer parts shop in GUANGZHOU??
Dear friends Anyone knows a shop or location in guangzhou where i can buy the parts for my new build? Many thanks
View ArticleRe: Cherry Pi III Is Available
Quotenka Thanks a lot Andy! Compared your setting with mine gave me some information on what to ajust. I changed some and added note to others, so I'll know what to change if it dosent go right. Does...
View ArticleRe: Cherry Pi III Is Available
There's a video I put on You Tube of Cherry Pi III printing [m.youtube.com] Andy
View ArticleRe: Cherry Pi III Is Available
Why the sort of R4 ? Tried to find informations, but I can't find any (I might be bad...). Seems to be for the extruder.
View ArticleRe: is their a 3d printer parts shop in GUANGZHOU??
Yes there are loads of them but they are easier to find online. A good way is to order them online and get them delivered to your hotel / or a friends place before you arrive there. If you want I can...
View ArticleRe: Calibrating Geared Extruder
I am over a year late to the discussion and your solution...I want to understand. I have a 5:1 geared nema17 and I too ( though yours is fixed) am getting little extrusion. In repetier I can adjust...
View ArticleRe: is their a 3d printer parts shop in GUANGZHOU??
Dear ekaggrat Thank you I sill have 10 days in guangzhou before traveling back I am planing to buy a complete set for a enlarged kossel Parts needed: soldered and assembled RAMPS 1.4 Iduino Mega 25605...
View ArticleRe: Cherry Pi III Is Available
Quotenka Why the sort of R4 ? Tried to find informations, but I can't find any (I might be bad...). Seems to be for the extruder. This will explain it [hydraraptor.blogspot.co.uk] Andy
View ArticleRe: 3DR "Simple" Delta Printer
I printed all of my parts on my cupcake CNC at .2mm LH and 60% infill. I am fairly confidant that my actual print speed never got to 80mm/s because the acceleration is so low. It's more likely that...
View ArticleRe: 3DR "Simple" Delta Printer
Does anyone have a decent Z-probe design for the 3DR or 3DR simple?
View ArticleRe: Cherry Pi III Is Available
Hi Andy, Thank you for design and sharing. Your design is very nice engineered. I would like to build on your design but I would like to do some changes, so, is it possible to provide igs or step...
View ArticleRe: Cherry Pi III Is Available
Quotezoltan Hi Andy, Thank you for design and sharing. Your design is very nice engineered. I would like to build on your design but I would like to do some changes, so, is it possible to provide igs...
View ArticleRe: Full graphic smart controller
Open arduino, Select sketch->Import Library...->Add Library..., and choose u8g folder
View ArticleRe: Dual extrusion, E-only move causing XYZ motion, bug in Marlin?
I found the same problem in my printer.My printer is the same as kossel,and I try to add dual extruders on the printer,but failed.when I send G-code 'T1',and the send 'G1 Xxx Yxx',the printer moves up...
View ArticleRostock mini pro, problem with movements
Hello, I'm new here and also new to 3d printers. I built a rostock mini pro with ramps 1.4. for the software configuration i used these instructions: [onedrive.live.com] after configurating the...
View ArticleRe: Rostock mini pro, problem with movements
Hi welcome to an amazing world i faced same problem first time homing this is my post: [forums.reprap.org] in the 5th reply ANDY wrote: Your endstop configuration is working o.k although you seem to...
View ArticleRe: Rostock mini pro, problem with movements
Start with the M119 command to check your endstop wiring. If the switches are reading triggered when the carriages are not touching them, the printer will think that it is already homed and not move...
View ArticleMini Kossel control issues
I am new the the reprap world and figured I would give it a go. I work in the aircraft industry and do quite a bit of metal work so I figured I would build my first Mini Kossel out of aluminum. It...
View Article