Re: Cherry Pi III Is Available
Printing ABS on a heated bed at 80mm a sec NICE :D ABS on heated bed
View ArticleRe: Delta design considerations/theory
The ball and string method is one I want to experiment with, but using Delrin or ceramic balls to keep the weight down.
View ArticleRe: How critical is the accuarcy of the different arm lengths ?:S
Quotehercek Marlin firmware can be easily updated to support different rod length for each tower (Repetier even supports this out of the box). But rods connecting to the same tower must be the same....
View ArticleRe: Core XY Printer £100.00 Build Cost
thanks for your quick answer. and thanks for the link... never saw it so cheap elsewhere :) i m at the moment salvaging some parts (bearings, rods, motors, end switch) from a big color laser printer,...
View ArticleRe: Delta design considerations/theory
Thanks a lot for the answers so far, that was quite helpful and insightful. Can someone explain the backlash issues associated with "Traxxas" bearings? I'm considering using more precise plastic...
View ArticleRe: Delta design considerations/theory
Quotefr Can someone explain the backlash issues associated with "Traxxas" bearings? I'm considering using more precise plastic bearings, but I'm not sure of the design constraints yet....
View ArticleRe: Delta design considerations/theory
Quotefr What bearing options do people use for the arms and what are their tradeoffs? There is some discussion of tradeoffs on this page: Joints for Delta Printer.
View ArticleRe: How critical is the accuarcy of the different arm lengths ?:S
Quotehercek The best approach is to use right threaded screw on one side of a rod and left threaded screw on the other. Glue the screws to the rod. Then screw the ball joints at the screws. This...
View ArticleRe: Cherry Pi III Is Available
[attachment 39207 LCDMount.JPG] [attachment 39208 20140828_092133.jpg] Hi Guys I found this LCD panel on Thingiverse. I've tweaked it a bit to make it fit Cherry Pi. I've also uploaded the .stl to...
View ArticleFSR using Trinket front end
A page that documents using FSRs as a auto leveling probe is available here. It represents the work of several other people all noted on the page - I just wanted a single place to reference the...
View ArticleRe: Cherry Pi III Is Available
Quotenka what is the size off that bed? Its the standard 200x200mm mk3 heated bed mounted on a di-bond sheet
View ArticleRe: 3DR "Simple" Delta Printer
Hi John. Excellent work. Thank you. I may take the plunge soon. For John or anyone, I understand the intent to keep things small and "simple", but could this design be adapted to use extrusions to...
View ArticleRe: FSR using Trinket front end
http://www.liming.org/3dprinter/FSR.html Based off of this thread at the Google Deltabot group: https://groups.google.com/forum/?fromgroups=#!topic/deltabot/9DR9oXoQoDw
View ArticleRe: FSR using Trinket front end
Thanks Wildcard - I fixed the above link - it should be working now.
View ArticleRe: RepRap 3DR Delta printer Released
Hey guys I am still having trouble getting my extruder motor to turn. I connected the motor to one of the other axis and it turned fine, so then i switched stepper drivers and again it worked fine. So...
View ArticleRe: Injection Molded Parts - Delta
Pssssssffft.... I can mold and cast 100 pieces for 10% of that protomold cost. I am currently casting an extruder for my Rostock. I can't stand using an FDM part for any mechanical purpose. Dogisht....
View ArticleNew to 3d printing, need help, please
Hi, I built a classic Rostock about a month ago. I bought almost everything online except the wooden parts which I made. I am having problems with making it run correctly. I can make it move only...
View ArticleRe: New to 3d printing, need help, please
It would probably help if you attached a copy of your config.h
View Article