Yeah! You are right hercek, those options are the ones that control the limits... it was there but I wasn't able to find it, thanks a lot!
The curious thing is that by default they are set to 90mm, that is 180mm in total length which is very very close to the "square circumscribed in a circle of 260mm diameter"... Hehehe
So, issue solved, thanks again
=)
The curious thing is that by default they are set to 90mm, that is 180mm in total length which is very very close to the "square circumscribed in a circle of 260mm diameter"... Hehehe
So, issue solved, thanks again
=)