I'm running MLX 6mm belt width 18 teeth. I'm running 1/32nd steps.
my mistake, although I did change it in the EEPROM I never changed it in the firmware .This is what it looks like now (#define DEFAULT_AXIS_STEPS_PER_UNIT {174.1, 174.1, 174.1, 439.5})
and I believe it's set correctly because the Z movement is the correct amount.
my mistake, although I did change it in the EEPROM I never changed it in the firmware .This is what it looks like now (#define DEFAULT_AXIS_STEPS_PER_UNIT {174.1, 174.1, 174.1, 439.5})
and I believe it's set correctly because the Z movement is the correct amount.