Hi Guys
I managed to get hold of a piece of V slot to compare it to the extrusion that I use, Bosch/Rexroth from KJN in the UK
[attachment 40592 20140920_092711.jpg]
You can clearly see the difference in the 'V' between the two types, hence the poor fit on V slot with it's much deeper V.
I've modified the carriage .stl and attached it above. You will also need to use the modified Rod Carrier, also attached.
Regards
Andy
I managed to get hold of a piece of V slot to compare it to the extrusion that I use, Bosch/Rexroth from KJN in the UK
[attachment 40592 20140920_092711.jpg]
You can clearly see the difference in the 'V' between the two types, hence the poor fit on V slot with it's much deeper V.
I've modified the carriage .stl and attached it above. You will also need to use the modified Rod Carrier, also attached.
Regards
Andy