Re: RepRap 3DR Delta printer Released
QuoteRomank Had to use some M8 nuts over the FSR. otherwise they did not work. I'm curious as to why a flat plate of glass over the FSR is not working. Did you apply adhesive tape to both sides of the...
View ArticleRe: Worm Drive Grounded Delta Printer
Sorry for the lack of update, I have been away on a spring vacation. I have been working on the molds and there is still some print geometry issues with the beta machine even with the new base plate....
View ArticleRe: RepRap 3DR Delta printer Released
Yes i glued the the FSR with adhesive tape to bottom metal plate. Also i glued with adhesive tape the M8 nut to the FSR. If i pressed this FSR only between to flat plates they did not respond. I dont...
View ArticleRe: Best Delta Controller??
We can't say for certain if 1/32 is better than 1/16 microstepping, there's a lot that goes into it. It's also true like stated before, increasing microstepping can make the true positional accuracy...
View ArticleRe: New Own Design Printer 'Cherry Pi'
Hi guys. I've just finished some experimenting with my machine. Since loading Rich Cattell's marlin fork with auto calibration and auto bed levelling, which is great btw, I've noticed my print head...
View ArticleWhich extruder to choose?
Hey guys,researching extruders has been fun, but I'm at a standstill on what extruder to use for my kossel mini(750/360) Hopefully this thread will help other people when they are just starting out as...
View ArticleRe: New Own Design Printer 'Cherry Pi'
Andy, do you have any links to the parts you got on Aliexpress? I'm looking for parts to make a printer and there's a lot of kit on the site, but wading through parts (especially steppers) is somewhat...
View ArticleRe: Which extruder to choose?
Consider an EzStruder from SeeMeCNC [seemecnc.com] E3D v5 the best hotend (with a mod to hold in thermistor [e3d-online.com] ;)
View ArticleClik here to view.
Re: RepRap 3DR Delta printer Released
I didn t want but had to change all parts. It still looks like john s simple 3DR but it is only the look..... No exotic linear bearing system...I will use normal and cheap stainless steel shaft in...
View ArticleClik here to view.
Re: 3DR "Simple" Delta Printer
I didn t want but had to change all parts. It still looks like john s simple 3DR but it is only the look..... No exotic linear bearing system...I will use normal and cheap stainless steel shaft in...
View ArticleRe: Which extruder to choose?
And another one to add to your list: [www.thingiverse.com] I would choose whichever one which allows me to change the gear ratio (by printing new gear or pulley).
View ArticleRe: New Own Design Printer 'Cherry Pi'
Hi Barny The electronics was a pack, [www.aliexpress.com] The steppers were from [www.aliexpress.com] Belt and pulleys from [www.aliexpress.com] All good quality and all delivered within a week....
View ArticleRe: Which extruder to choose?
This one looks a bit good too. I'm planning to print it next week so I will post back with a review [www.thingiverse.com] Andy
View ArticleRe: New Own Design Printer 'Cherry Pi'
Andy, thanks very much for taking the time to link to those, it's very handy to have a recommendation and some clarity. I've placed an order Barny
View ArticleRe: Which extruder to choose?
A larger effector is a bit more stable I have found but you may lose some print size. The Kossel mini effector is about as small as I would consider. I prefer my extruder mounted on top, pointing...
View ArticleRe: New Own Design Printer 'Cherry Pi'
Super cool idea about the granite top - just ordered some borosilicate glass too! Hahaha...(tu)
View ArticleRe: Which extruder to choose?
Wow thanks again sheepdog. I'll look into the berrytripper. So many derivatives to look at
View ArticleRe: a new extruder motor setup design to try out.
If I want to try out and dont have a seemecnc, what are the parts needed ? (beside the double 608 bearings and what looks to be a MK8 filament gear) also, its a direct drive extruder, what makes it...
View ArticleRe: Which extruder to choose?
Quote3DRapidClone I'll look into the berrytripper. If you want something like geared airtripper, then you may want to consider this one too: [forums.reprap.org] It is the same as the rest except it is...
View Article