Re: Why is filament line better than belts?
As a non professional I can only state from my own experience. Strings are much better ..... on my guitar. (b.t.w. I have never seen a guitar with belts :-) whoehaa Thomas
View ArticleCan't upload the Firmware when MAX_HARDWARE_ENDSTOP_Z is changed to true
Hello, I am trying to upload the repetier-host firmware on ATMega2560 + Ramps 1.4 for my Delta Printer But it wont. It will always stop uploading at 39% with Arduino IDE 1.5.2 Arduino IDE 1.0.6...
View ArticleRe: Why is filament line better than belts?
There are some steel wire in under 1mm. That may be a good choice to use in 3d printer.
View ArticleDo anything interested in building a delta machine with lasercut parts?
Here is a lasercut plan I drawed for delta machine.
View Articlebasculating end effector problem
Hello all! First time poster here. I'm building my second delta, this time with a double extruder setup but i'm having a very hard time calibrating it. The problem i'm encountering is that the end...
View ArticleHeatbed Kit with Carbon Fibre surface - practical experiences?
Hi, anyone have this delta heatbed with carbon surface and can tell practical experience about it? Thanks and regards, Florian
View ArticleRe: Traxxas rod end alternatives?
igus. They are delivered already. However I wont get to use them for a few weeks. Due to a move I am undergoing.
View ArticleRe: Heatbed Kit with Carbon Fibre surface - practical experiences?
The only mention I saw about having a CF surface is for people running heated beds printing PLA. I have not seen it used for ABS. I would be worried about the stability of the resin at the higher...
View ArticleRe: basculating end effector problem
If the effector is moving in a bowl shape then you need to play with the following numbers. In my marlin firmware as I recall the number I played with was. #define DELTA_SMOOTH_ROD_OFFSET 205.9 // mm...
View ArticleRe: Why is filament line better than belts?
Quotebunbun There are some steel wire in under 1mm. That may be a good choice to use in 3d printer. One thing that worries me about using steel braided cable is fatigue and work hardening. The more...
View ArticleRe: Can't upload the Firmware when MAX_HARDWARE_ENDSTOP_Z is changed to true
You should remove the comment if you want that enabled if I am not mistaken. So the code would look like define MAX_HARDWARE_ENDSTOP_Z true (NO # sign in front of it)
View ArticleRe: Heatbed Kit with Carbon Fibre surface - practical experiences?
I tried it and rarely use it now (not that exact one but a carbon fibre plate from the same supplier). With PLA and PETG I find adhesion not as good as glass. For a Kossel mini this seems a good...
View ArticleRe: Can't upload the Firmware when MAX_HARDWARE_ENDSTOP_Z is changed to true
it still doesnt work, this wouldnt recognize as c++ syntax??
View ArticleDid someone flash successfully repetier firmware 9.1 on delta printer?...
Did someone flash successfully repetier firmware 9.1 on delta printer? I am using Arduino Mega 2560 and Ramps 1.4. Send me the configuration.h please? Or post here? Mines won't flash where I written...
View ArticleRe: Did someone flash successfully repetier firmware 9.1 on delta printer?...
I installed Repetier 0.91 on my Minitronics, you can find my firmware install log here. I used Arduino 1.0.5 Hope it helps!
View ArticleRe: Can't upload the Firmware when MAX_HARDWARE_ENDSTOP_Z is changed to true
That is a strange problem... If I understand correct, you can compile the firmware without errors with both true and false, but when you try to upload the binary it always fails with true and always...
View ArticleRe: Marlin and clay paste extruder (skiping)
I'm still thinking Marlin is weak on the speeds. printing food
View ArticleRe: FSR sensors and heated bed
QuoteAndyCart Quotesheepdog43 Endstops are ignored while printing. If you plan on only heating one area, it will need to be boro, otherwise you will break the glass. Not necessarily. I have a similar...
View ArticleRe: basculating end effector problem
nope As I said is not the usual bowl shape trajectory. The center of the effector stays level with the base through the whole movement range. however at non center coordinates the effector (and the...
View ArticleRe: basculating end effector problem
Are your towers equidistant and the rods of equal length?
View Article