Re: Delta-Pi Endstop Problem in Repeteir
Here's a screen shot of my Slic3r speeds tab. The speeds are the same as I use on my Prusa-Mendel [attachment 22278 2013-12-03_0922.png] So I'm doing perimeters at 50mm/s and infill at 80mm/s But then...
View ArticleRe: 3DR "Simple" Delta Printer
RTurnock- I read your question, and hope that you might make it more clear: 1) Are you printing with a copy of the 3DR Simple Delta? 2) Are you printing with a PrintrBot Simple? 3) Are you printing...
View ArticleRe: Grounded Experimental Delta Printer
So now that the files have been released for GUS, I have one question: Is the GUS Simpson a viable option as a first 3D printer? Why or why not? Obviously I know things are still in the beta stage,...
View ArticleRe: 3DR "Simple" Delta Printer
Great Questions by Phuzzy Logic, 1) Are you printing with a copy of the 3DR Simple Delta? No, printing with a Printrbot Simple V2 received Oct 16, 2013, assembled and have been printing. I have a box...
View ArticleRe: 3DR "Simple" Delta Printer
Great post John! I've just started printing the lower frame on my Mendel and plan to order the remaining hardware this week. Looking forward to testing this design out, thanks for all the time and...
View ArticleRe: 3DR "Simple" Delta Printer
RTurnock- Thank you for the prompt reply. The PLA I received from PrintrBot was the clear translucent variety. Sorry to hear about the complications from the mismatched extruder parts. I have the...
View ArticleRe: Delta-Pi Endstop Problem in Repeteir
I've updated my firmware to match yours and I've matched my Slic3r settings to yours. I also slowed down the first layer speed from 200% to 50%. I still think I'm having problems though. It seems to...
View ArticleClik here to view.
Re: Grounded Experimental Delta Printer
@ pjoyce42 Quotepjoyce42 Is the GUS Simpson a viable option as a first 3D printer? Why or why not? I think Simpson is a viable printer if you are only creating objects that fit air (vase, art) or can...
View ArticleRe: RepRap 3DR Delta printer Released
I don't know if mine will help you because I tweaked it so that I could use it with a Full Graphic Smart LCD display, anyway, I can share with you it or the configuration I used, that it, what I...
View ArticleRe: Delta-Pi Endstop Problem in Repeteir
You shouldn't need to mess with the PINS settings. RAMPS1.4 is covered by #define MOTHERBOARD 33 If you use this then in pins.h it is already configured as this: #define E0_STEP_PIN 26 #define...
View ArticleClik here to view.
Re: RepRap 3DR Delta printer Released
Hi All, Part 4 of the 3DR build and tutorial is finally up - FIRMWARE, enjoy and do tell me what's missing for you Marlin_compile.jpg Lots of other cool stuff also discussed too. Cheers, Rich.
View ArticleRe: 3DR "Simple" Delta Printer
@RTurnock In my experience, the gear sent by printrbot for the direct drive extruder, can be used with either 1.75mm or 3mm filament, however there a few things to note, many of the wooden parts on...
View ArticleRe: Delta-Pi Endstop Problem in Repeteir
I will work on getting the carriages preloaded. I must have something weird going on in my configuration/pins because I have motherboard 33 defined in configuration.h, but the only way I could get my...
View ArticleRe: Grounded Experimental Delta Printer
@A2: The new design has fixed all the errors that you linked to. Testing still has to be done. Time will tell. None of the errors are due to the firmware. The main hurdle is implementing a more...
View ArticleRe: RepRap 3DR Delta printer Released
Thanks for the two responses with the extended 3DR files :)! (and richard for the most recent 3dr update)
View ArticleRe: LISA Simpson
Sorry, I don't know how far it would be off (I have a lot of leeway on my install and it's just 1 rod for the Z-axis of a cartesian bot.)
View ArticleRe: LISA Simpson
@Tomek: That is smart! A slow one-way axis like the z axis is perfect for this kind of screw. Since you have a setup could run it up and down 100 times or so and see if there is any measurable drift....
View ArticleRe: Delta-Pi Endstop Problem in Repeteir
You should have "#define MOTHERBOARD 33" in the first section of your configuration.h file. If you do then the code you edited does nothing and if it made any difference then it was just coincidence.
View ArticleRe: LISA Simpson
Would a spinning threadless ballscrew work as a filament driver? Or is the diameter of filament too unreliable? The biggest hurtle I can think of is that variation in the filament diameter would cause...
View ArticleRe: 3DR "Simple" Delta Printer
Hi JohnSL, Thanks for all the documentation on the "Simple" 3DR Delta conversion. "many of the wooden parts on the printrbot simple v2 need some attention with sand paper, files maybe even a dremel...
View Article