Clik here to view.
Re: Worm Drive Grounded Delta Printer
@Solidus Labs: FYI: Black plastic can have recycled plastic in it, never use black plastic for parts of value. Natural, and white are your safest choices for filament. A few examples of extruders that...
View ArticleRe: New Own Design Printer 'Cherry Pi'
Hi Charlie here you go :- #ifndef CONFIGURATION_H #define CONFIGURATION_H // This configuration file contains the basic settings. // Advanced settings can be found in Configuration_adv.h // BASIC...
View ArticleRe: Rostock delta robot now moving at 400mm/s
Quotemohamd fathy please from where can i pay this parts ??? please answer Start a new thread with your question. Try ebay, and the user group of your country: [forums.reprap.org] Post a new thread in...
View ArticleRe: 3DR "Simple" Delta Printer
funkymonk, that looks awesome!! I just ordered all of the rest of the parts for mine. Waiting on the controller, smooth rods t-slot nuts and linear bearings. I may print some bearings on my Makerfarm...
View Articlerostock qustions
I finally decided to build a rostock for my next printer because it seems like it uses less parts than most printers and its cool to watch. Also, I'm looking for more challenge than my prusa i3. Just...
View ArticleRe: LISA Simpson
Some modeling based on the drawing at Lisa variant concept by A2 kinematic model I observed a sizable volume at the top that is never intruded by the arms or head. Might be a good spot to install...
View ArticleRe: Worm Drive Grounded Delta Printer
QuoteA2 @Solidus Labs: FYI: Black plastic can have recycled plastic in it, never use black plastic for parts of value. Natural, and white are your safest choices for filament. A few examples of...
View ArticleRe: Worm Drive Grounded Delta Printer
I recognize that your parts are for a non life threatening, or life support application, and that there are sources of quality black plastic. In hindsight, I may have used the word never too strongly....
View ArticleRe: rostock qustions
Based on experience from a rostock built from a kit. Quotegman 1. Should I go with rods or the printed rods? Will it really matter? Printed rods with u-joints weared out after about 10 hours of...
View ArticleRe: 3DR "Simple" Delta Printer
The LCD is a clone of reprapdiscount one. The brackets are designed by me.
View ArticleRe: 3DR "Simple" Delta Printer
No, I was referring to the box you printed for it. I have the same lcds for ask of my controllers. Are you using ramps?
View ArticleRe: 3DR "Simple" Delta Printer
RTurnock, I have a complete (I think) parts list on my blog: [trains.socha.com]. This list assumes you're starting with a Printrbot Simple, so whatever steppers that come with the Simple.
View ArticleRe: 3DR "Simple" Delta Printer
@JohnSL Thanks for all the great documentation. I got prices for all but the screws and nuts. Estimate about $220 to convert my Simple to a 3DR following your process. Buy 180 mm CF rods, and use GT2...
View ArticleRe: 3DR "Simple" Delta Printer
Nice build, I am building a Delta Rostock myself at the moment, are you using a 175mm bed centre to rod configuration or is yours a smaller?
View ArticleRe: 3DR "Simple" Delta Printer
I used 200mm rods and have a print area of ~185mm of diameter.
View ArticleRe: Delta hot end keeps melting plastic body
Ok that seems to have worked its now doing what I would expect thanks for the info. One other question I have- is there a Delta rostock bed settings on slicer do you know I cannot seem to find one,...
View ArticleRe: The minimum angle between rods and tower?
I like your rod end bearing design, I saw this on another machine and there were springs across both sides top and bottom, do you have any thoughts on why? I am thinking of changing mine to this...
View Article3DR 6mm rods supplier in the UK
Any ideas where to get the 6mm rod for a 3DR in the UK? Im doing well at sourcing everthing else but this is proving a pain ... I've already bought the LM6UUs and printed the base parts so im...
View ArticleRe: rostock qustions
Thanks for clearing that up. The hardest part for me will be figuring out which screw, washer and bearing to use but I'm looking at some pictures of a rostock build and I think I'll be able to figure...
View Article