Couple things to add:
16AWG was too thick for the terminals, needed to use 18AWG...
I am using the M119 Gcode command in repetier host to test the signals of the end stops and I am infact getting the correct H and L readings for when the switches are either pressed or not. So i am really starting to think i have a firmware or software problem. Using R-Host for mac. I will probably try to boot into windows and try that instead soon.
16AWG was too thick for the terminals, needed to use 18AWG...
I am using the M119 Gcode command in repetier host to test the signals of the end stops and I am infact getting the correct H and L readings for when the switches are either pressed or not. So i am really starting to think i have a firmware or software problem. Using R-Host for mac. I will probably try to boot into windows and try that instead soon.