Re: Debugging Question
Seems I might have a bad stepper driver. I swapped it and the problem moved with it. I replaced with the one I was going to use for the extruder and now all steppers move in sync and in the same...
View ArticleRe: Kossel endstops
Sounds like your direction signal is not being recognized by the driver. You don't have Y-min enabled do you? What does M119 report?
View ArticleRe: Debugging Question
Did ypou solder the drivers headers yourself? Inspect the joints and reflow and iffy or cold solder joints. If that was greek then [www.youtube.com]
View ArticleClik here to view.
Re: Kossel 2020 Build log
I dumped the MakerGear V3 and ordered an E3D Bowden from filastruder.com Time was very accommodating and let me order it with a 0.6mm nozzle instead of the stock 0.4mm. I modified the effector.scad...
View ArticleRe: Debugging Question
Nope, I bought these. Probably will take a magnifying glass to it to see if there is a problem. Reflowing the direction pin will be easy to try.
View ArticleRe: Kossel endstops
I suspected the direction pin based on the behaviour and swapped in the extruder driver which magically fixed the problem. I did have the endstops wired to the min inputs because thats what the...
View ArticleRe: Kossel endstops
If using Repetier, use the Tower endstop offsets to "move" the endstops toward the print surface. [reprapandme.blogspot.com] QuoteWZ9V My X, Y, Z are still a bit high and I have not even started to...
View ArticleRe: Rostock Parts no where to be found.
Quotejaydmdigital You seem pretty sure it'll all work out....if you are using any other experience as a basis for your optimism you are going to get a rude awakening. Please do blog your progress, you...
View ArticleRe: Kossel endstops
Thanks. I had forgotten about those. I'm so close at this point it probably is the right time to use that adjustment.
View ArticleRe: Is the original design dead?
Thank you for the elaborate answer. I find the direct drive delta the most fascinating design, that's the reason I was asking. My intention is to build and program a controller and motor drivers...
View ArticleRe: 3DR "Simple" Delta Printer
I've ordered myslef a QU-BD one up and given its similar build volume to the printrbot simple and low price point, am considering converting it to a 3DR simple. However I am on a budget (as I'm sure...
View ArticleRe: 3DR "Simple" Delta Printer
Hi CAD321, Great contribution documenting all the parts in the spreadsheet format. Wish I had that when I built mine earlier this year. I bought a Printrbot Simple kit without the wood just before...
View ArticleRe: 3DR "Simple" Delta Printer
CAD321, One other thing about the 3DR Simple is the choice of Spectra line versus belts. I built mine with Spectra line and have the belts and pulleys to upgrade but have not done that yet. Some...
View ArticleRe: 3DR "Simple" Delta Printer
QuoteCAD321 I've ordered myslef a QU-BD one up and given its similar build volume to the printrbot simple and low price point, am considering converting it to a 3DR simple. However I am on a budget...
View ArticleRe: Auto Level problems
SENDING:M119 Reporting endstop status x_max: open y_max: open z_min: TRIGGERED z_max: open Thanks for trying to help!
View ArticleRe: Auto Level problems
Have a look at these threads for your answer. [forums.reprap.org] [groups.google.com]
View ArticleRe: Which extruder to choose?
I just wanted to post about my experiences with the Bulldog extruder. I ordered it through their initial Indiegogo campaign, so I would have a good extruder for my new printer. Not sure if I got a...
View ArticleClik here to view.
Re: Which extruder to choose?
QuoteJBernal I just wanted to post about my experiences with the Bulldog extruder. I ordered it through their initial Indiegogo campaign, so I would have a good extruder for my new printer. Not sure...
View ArticleRe: Is the original design dead?
Quotegeorgi Thank you for the elaborate answer. I find the direct drive delta the most fascinating design, that's the reason I was asking. My intention is to build and program a controller and motor...
View Article