Clik here to view.
Re: How to invert x and y, but not z
I was referring to this image on your website: Rostock_Mini_Pro_Front_3_preview_featured.jpg It has the extruder below. But than again... maybe it's not your build ? Did you shorten the bowden after...
View ArticleRe: Marlin Delta Firmware Issue
You seem to have copied Configuration.h from the example_configuration folder? This did not work for me, the default Configuration.h is newer and worked better! You have selected MOTHERBOARD 34 in...
View ArticleRe: Marlin Delta Firmware Issue
Where can I find a fresh Default config.h? I have so many versions of config.h I am not sure which one is the one to use! Also, looking at the pins, doesn't the max pins say -1? Or am I looking in the...
View ArticleRe: Marlin Delta Firmware Issue
You can use this one from the repository. Update: The MAX pins are set to -1 when MOTHERBOARD == 77, your configuration can be found under the #else.
View ArticleRe: Marlin Delta Firmware Issue
Hey, Still have the same issue with the new config.h file. Looks like the only reason left is the Hardware. which looks unlikely due to the fact of it homing fine? Crazy...
View ArticleRe: Marlin Delta Firmware Issue
Crazy indeed! Before your edit you told that it crashed into the endstops, that means that it probably looked at the wrong endstop pins. Does M119 report something else this time? Is it TRIGGERED when...
View ArticleRe: How to invert x and y, but not z
And forgot: How did you mount the extruder motor to the top acryllic ? Close up piucture please ? I think I wil copy your setting thnks
View ArticleRe: Marlin Delta Firmware Issue
The reason I editied was that I had indeed made a silly mistake in the config.h file. I // out the define ENDSTOPPULLUPS. :D All fixed now! but still having the same crazy issue. I have attached a...
View ArticleRe: Marlin Delta Firmware Issue
The forum can't find your attachment...? OK, things to try now we are becoming a bit more desperate: Some time ago you copied the example_configurations files to the project root, after that you...
View ArticleRe: Marlin Delta Firmware Issue
I tried changing board from 33 to 35. Also changing both the software end-stops to false. (These changes didn't solve the issue either) I am currently using your version of config.h, so would you be...
View ArticleRe: Marlin Delta Firmware Issue
I will attach it to this message in about an hour when I am home! The file has been attached, I don't remember changing this file though!
View ArticleRe: Marlin Delta Firmware Issue
I have downloaded and put the new config_adv.h into the marlin folder. When I get to the office tomorrow I will try again. If this doesn't fix it I don't know what will! :(
View ArticleClik here to view.
Re: How to invert x and y, but not z
Oh , that is the picture of Rostock Mini Pro from Thingiverse . Those pictures are really missleading as they hide things like extruder under printer bed just to look good but in reality that printer...
View ArticleRe: Marlin Delta Firmware Issue
Repetier firmware might work! If that also does not work it is a hardware problem...
View ArticleNeed help new with g30 a command
Hi I am totally new to 3d printers and have recently bought a cherry pi I cannot get it to stick to bed I think it needs calibrating.How to I start a G30A command?
View ArticleClik here to view.
Re: What parts do I need to replace / modify if i use 2020 aluminum frame for...
I guess 1515 aluminum extrusion is rather hard to manufacture. Two issues I've found so far when using 2020 aluminum extrusion: Six vertex frames replacement or modification of the square hole. Forty...
View ArticleRe: Cherry Pi III Is Available
Haha, was just test fitting some then, and it appears the T Nuts are slightly too big for the V Slot! Nooooo haha. *reaches for the sandpaper*
View Article