Re: Traxxas rod end alternatives?
Holy smokes. 8 euro for 12 of those joints is a nice price, but freaking 26 euro shipping? ~50usd for ball joints? No way.
View ArticleDelta Heated Chamber Preparations!
I am preparing my delta so it can have a heated chamber. At this point I have done the following. 1 - Printed an ABS end effector 2 - Aluminum plates are holding the effector sandwiched and stable...
View ArticleRe: Delta Heated Chamber Preparations!
Yes ABS. I plan on printing everything in ABS. PLA does not make me very happy as a material. After ABS I plan on printing in nylon as well.
View ArticleRe: Delta Heated Chamber Preparations!
Due to the fact that I have the same "dream", a heated chamber for Delta, I'll share some thoughts. 1. It's hard to do a heated chamber for delta. Especially due to the fact that Delta's are ... tall....
View ArticleRe: Delta Heated Chamber Preparations!
Edit: this is more intended to address @alexella's point than to suggest that you change up your whole setup, @jaguarking11. I haven't tried it with my own setup, but I remember it used to be popular...
View ArticleRe: FSR sensors and heated bed
We've done the research on this, and the answer is... It depends. If you use Johann's code, it may be possible... You will need to really insulate the bed well as the readings could exceed what Johann...
View ArticleRe: Delta Heated Chamber Preparations!
1 - The automotive heater will be at the top of the printer. It has a blower in it. It should for all intense and purpose blow hot air down. Furthermore the thermostat controlling the temperature will...
View ArticleRe: FSR sensors and heated bed
Thank you sheepdog43, you are awesome it seems you always end up answering my questions. Now that you mention the trinket, I saw it and I was a bit confused since as I understood you connected the...
View ArticleRe: Delta Heated Chamber Preparations!
Hi, at the moment I am building my first delta with a hexagon base with a lot of modified parts of the Hexagon of Fablab Karlsruhe. I have the same plan with a heated chamber. Have a close look at...
View ArticleRe: FSR sensors and heated bed
You're welcome. FSR's return a different resistance depending on weight. How Johann's system works is the resistance exceeds a certain number the firmware treats it as being triggered. Heating them...
View ArticleRe: Traxxas rod end alternatives?
Hi, I am building a delta as well, I use these, KBRM-03 MH. Some people in germany are very impressed by the tolerances. Manu
View ArticleRe: FSR sensors and heated bed
If you use Johns FSR board [github.com] you don't have to reset it, as it adjust itself constantly. Also it has 3 LEDs which helps a lot during setup as you can easily see, which sensor fires and if...
View ArticleRe: Delta Heated Chamber Preparations!
Take this for what its worth because I'm a newbie to delta printers but I have about 10 spools worth of experience printing ABS on a Cartesian printer and I've tried about every combination of heated...
View ArticleDelta robot programming
Hi guys. Which sensor a delta robot uses to record the angles of the servos? use encoders? Can someone share same link about construction of delta robots? thanks
View ArticleRe: Nozzle size? The effect of it?
Well while waiting for a new hot end. I decided to try to print with the huge nozzle. The ID I estimate is around 1.5mm to 1.6mm. I tried setting cura to do the slicing and it honestly did not work...
View ArticleRe: Delta Heated Chamber Preparations!
QuoteProtoprinter Hi, at the moment I am building my first delta with a hexagon base with a lot of modified parts of the Hexagon of Fablab Karlsruhe. I have the same plan with a heated chamber. Have a...
View ArticleRe: Traxxas rod end alternatives?
Or you could read about them in English: [www.igus.de] [www.igus.eu] €3.40 each so a bit more costly than traxxas.
View ArticleRe: Traxxas rod end alternatives?
QuoteProtoprinter Hi, I am building a delta as well, I use these, KBRM-03 MH. Some people in germany are very impressed by the tolerances. Manu I just contacted them about ordering some of those rod...
View ArticleRe: Rostock problems on the outer regions.
I think the problem was an unlevel bed, didn't think it could do that much. Got me an indicator clock with 2 um dial, now its leveled and the prints are much better, close to perfect! Thanx everybody!
View Article